24
M
AKING
A
CALL
When you engage the line by
lifting the telephone handset
, you
may use all the telephone functions available on ordinary telephones
sold on the market.
These also include the
R
function (REGISTER RECALL, activated by
pressing the key) which provides access to the special services
made available by the company that manages the telephone network.
You can also use the following functions:
Call the correspondent using the fast dialling procedures set, see
Telephoning with one-touch dialling
and
Telephoning with
speed dialling
.
Momentarily hold a telephone call
by pressing the
(
HOLD
)
key. The call is resumed as soon as the same key is pressed again.
T
ELEPHONING
WITH
ONE
-
TOUCH
DIALLING
Place the original document in the ADF.
1. Press the desired numeric key, for example, for more than
one second (in example
):
-
The display shows the associated telephone number that
you stored (see
Setting one-touch and speed dialling
,
chapter
Basic transmission and reception operations
).
If a name was also associated with it, the display will show
this, too.
2. Once the number has been dialled, if the correspondent is
free, you can lift the handset and start talking.
The display shows the length of the call in minutes and
seconds in the top right-hand corner.
T
ELEPHONING
WITH
SPEED
DIALLING
Place the original document in the ADF.
1. Lift the handset to engage the line.
The display shows:
OFF HOOK
And the length of the call in minutes and seconds in the top
right-hand corner.
2. Press the key:
The display shows:
TEL CALL
CODE OR < >
3. Type the desired speed dialling code, for example
. To do so, press the keys:
-
The display shows the stored telephone number (see
Setting one-touch and speed dialling
, chapter
Basic
transmission and reception operations
).
If a name was also associated with it, the display will show
this, too.
Once the number has been dialled, if the correspondent is
free you can start talking.
T
ELEPHONING
WITH
THE
HELP
OF
THE
PHONE
BOOK
Place the original document in the ADF.
1. Lift the handset to engage the line.
The display shows:
OFF HOOK
And the length of the call in minutes and seconds in the top
right-hand corner.
2. Press the key:
The display shows:
TEL CALL
CODE OR < >
Select the telephone number or name of the correspondent
you want to call.
3. To do so, press the key:
/
4. To start the dialling procedure, press the key:
Once the number has been dialled, if the correspondent is
free you can start talking.
All manuals and user guides at all-guides.com