background image

3MK

1-3-3

(3) Contents of the maintenance mode items

Maintenance

item No.

Description

U031

Checking switches for paper conveying
Description

Displays the on-off status of each paper detection switch on the paper path.

Purpose

To check if the switches for paper conveying operate correctly.

Method

1. Press the start key.
2. Turn each switch on and off manually to check the status.

When a switch is detected to be in the ON position, the display for that switch will be highlighted.

Completion 

Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.

U233

Limiting job separator output
Description

Sets a limit of number of output pages from the job separator.

Purpose

Settings may be modified if curled paper is output from the job separator.

Setting

1. Press the start key.
2. Select the mode using the cursor up/down keys.

Initial setting: MODE0

3. Press the start key. The setting is set.

Completion

Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.

Display

Switches

EJE

Eject switch (ESW)

RES

Registration switch (RSW)

PF2

Cassette feed switch 1 (CFSW1)
(option for 18 ppm model / standard for 22 ppm model)

PF3

Cassette feed switch 2 (CFSW2) (option)

BRA

Feedshift switch (FSSW)

DUP

Duplex paper conveying switch (DUPPCSW) (option)

JOB

Job eject switch (JBESW)

Display

Description

MODE 0

All sizes: 100 sheets

MODE 1

A3/Ledger sizes: 50, other sizes: 100

Y112370-6 Service Manual 

Summary of Contents for JS-420


































Reviews: