14
The fax machine automatically cancels all memo-
rised transmissions after successful transmission.
Once set, transmission from memory can be:
•
modified only if not already being transmitted,
•
re-sent only if programmed to do so should trans-
mission fail (see “Enabling/Disabling the Re-
sending of a Failed Transmission from Mem-
ory” chapter “For a more sophisticated use"),
•
cancelled at any time.
See procedure in next section. You can also request
the print-out of the relative parameters. The param-
eter print-out contains the following information:
•
Doc N.
Reference number of the
stored document. This
number associates a doc-
ument to each transmis-
sion (single or broadcast-
ing) operated from the
memor y.
•
Pages
Total number of pages of
the stored document.
•
Set for:
Date and time at which the
transmission from memory
(single or broadcasting)
will be executed.
•
Act. n.
Progressive number of
each transmission stored
in the memory. In case of
broadcasting, the number
increases for each single
transmission associated
with the broadcast.
•
Selected number
Fax number on the remote
fax that you have called.
•
Date/Time
Date and time at which the
transmission was carried
out from the memory. In
case of broadcasting, it will
indicate the date and time
at which each transmission
associated with the broad-
casting has been carried
out.
•
Status
Status of transmission
from the memory. In case
of broadcasting transmis-
sion, the status of each
single transmission asso-
ciated with the broadcast-
ing will be indicated.
Besides the above-mentioned parameters, to help
you identify the stored document, the fax prints a
small portion of its text.
CHANGING/RESENDING/CLEARING A PRE-
SET MEMORY TRANSMISSION ...