READ THESE IMPORTANT RECOMMENDATIONS FIRST ...
The fax machine that you have purchased is a high
quality product satisfying all requisites indicated in
the guidelines on the previous pages.
For its best use you should follow the general rec-
ommendations indicated hereafter.
LOCATION ...
•
Place the fax machine on a stable, flat surface
with no vibrations, in order to avoid falls which
could cause injury to people or damage to the
product.
•
Keep the fax away from water or steam sources,
excessive heat sources and dusty rooms. Also,
do not expose it to direct sunlight.
•
Keep the fax away from other electrical or elec-
tronic appliances which may generate interfer-
ences, e.g. radio, television, etc.
•
Do not surround the fax with books, documents
or objects which reduce the space necessary for
air circulation. Ideal environmental conditions for
its location are from 5°C to 35°C with a humidity
rate between 20% and 80%.
CONNECTION TO THE ELECTRICAL POWER
SUPPLY ...
•
The fax machine is provided with a power cable
with a grounded plug. If your wall power socket
does not allow plug insertion or if it does not have
a ground, get in touch with a qualified electrician
to update your electrical mains outlet to the cur-
rent standards.
•
Make sure that the power cable is easily accessi-
ble without impeding the passage, avoiding tread-
ing on, or tripping over it.
•
Make sure that power voltage and frequency of
the electrical outlet correspond to the power volt-
age and frequency values indicated on the rear
plate of the fax machine.
•
Never connect the fax to a multiple plug or to an
extension cable which already has another ap-
pliance connected: poor electrical contact may
cause overheating and originate fire or electrical
shocks.
CONNECTION TO THE TELEPHONE LINE ...
As the connection of the fax machine, telephone,
answering machine and other devices to a telephone
line is subject to national standards, please refer to
the regulations in force in your own country.
INSTALLATION AND SET-UP PARAMETERS ...
At national level, the settings and set-up parameters
for each installation may change according to the
requirements or individual user needs. Therefore,
these settings and the ones indicated in the manual
may not always be the same: it is suggested that you
print them out before making any modifications.
MAINTENANCE ...
•
When cleaning the fax, first of all disconnect it
from the electrical power supply. Use only a damp-
ened cloth. Do not use corrosive substances, such
as solvents, alcohol, petrol or abrasive compo-
nents.
•
Never introduce foreign bodies (liquids included)
in the fax machine: their accidental contact with
powered parts may cause a fire or electric shocks.
REPAIRS ...
•
Never try to repair the fax if you do not have the
necessary competence: by removing the outer
casing, you may risk electrical shocks or other
injury. Always call a qualified service technician.
•
When you replace components (accessories in-
cluded), make sure that you use only original ma-
terial approved by the manufacturer. Use of other
material might compromise the safety features,
besides being a cause of fire and electrical shocks.
•
If any of the following conditions occur, discon-
nect the fax from the power supply and contact a
qualified service technician:
- the power cable, or its plug are damaged or
worn
- the outer casing is damaged
- liquid has been poured inside by accident (rain
included!)
- the fax machine does not respond correctly to
the instructions given on this manual. In this
case, carry out only the adjustments indicated
for the function which is causing the problem.
Incorrect or unauthorized intervention may
cause damage which requires additional work
for the service technician.
FOR CORRECT USE ...
•
Before operating with your fax machine, read
carefully all the instructions contained in this
manual. Keep the manual for further consulta-
tion.
•
The fax machine has already been set for opera-
tion according to the standards of the telephone
network within your country.
•
If you do not use the fax machine for long peri-
ods it should be disconnected from the power
supply to avoid damage from power surges and
peaks.