97
Fax operation (Other functions)
1. Set the documents to be transmitted on the document
table, and select the resolution.
* To cancel the procedure part way through, press the
STOP/RESET key. The fax will revert to the initial mode.
2. Press the FUNCTION key twice.
POLLING
FUNCTION/ENTER
Polling refers to the method of communication whereby transmission is not initiated by the
transmitting party, but is requested and initiated at the convenience of the receiving party.
There are 3 types of polling procedures: polling transmission, memory polling transmission
and polling reception.
* Since the transmission is initiated by a call from the receiving party, telephone charges will
be billed to the receiving party.
Polling
(1) Polling transmission
To set documents on the document table and have them transmitted when a polling request is
received, the transmitting party is required to carry out the following procedure.
* Polling transmission is only possible in the ADF transmission mode. (Refer to Memory Switch
No. 94: “Transmission Mode”, page 142.)
* Polling transmission is impossible when the fax is in the manual fax reception mode.
* To cancel a polling transmission while documents remain on the document table awaiting the polling
request, press the STOP/RESET key.
01.04.'97 12:00*
100%
Summary of Contents for OFX 5500
Page 187: ......