129
Other settings
Self-station information (fax number and name)
Information identifying your station (fax number and name) will, if registered here, be printed out on
the destination fax’s recording paper, thereby instantly notifying the receiver of the source of fax
transmission.
To enter this information, carry out the following procedure.
* Modification of previously registered information is accomplished by following the procedure below
and changing the registered data to that desired.
* In order to verify previously registered information, print out a Preset list. (Refer to “Preset list”,
page 123.)
* It is also possible to prevent the self-station information registered here from being printed out at the
destination fax. (Refer to Memory Switch No. 07: “TTI Transmission”, page 140.)
* To cancel the procedure part way through, press the
STOP/RESET key. The fax will revert to the initial mode.
01.04.'97 12:00*
100%
1. Press the FUNCTION key 6 times.
USER SETTING
FUNCTION/ENTER
2. Press the ENTER FUNCTION key.
SETTING
FUNCTION/ENTER
3. Press the ENTER FUNCTION key 3 more times.
* If a fax number has been previously registered, that
number will appear on the message display.
FAX=+
KEYPAD/ENTER
●
Fax number
4. Use the keypad to input your fax number. (Max. 20
digits)
* To add a plus sign (+) at the beginning of your fax
number, press “
” on the keypad.
FAX=+1234567
KEYPAD/ENTER
Summary of Contents for OFX 5500
Page 187: ......