20
T
RANSMITTING AND RECEIVING
♦
Date/Time:
The date and time at which the document was
sent from the memory. In the case of broadcast
transmissions, the date and time for each indi-
vidual transmission is indicated.
♦
Duration:
Duration.
♦
Pages:
Number of pages transmitted.
♦
Status:
Status of transmission set in memory. In the
case of broadcast transmissions, the status of
each individual transmission on the list will be
shown.
CHANGING, REPEATING OR CANCELLING A
TRANSMISSION ALREADY STORED
1.
Make sure you have set a transmission from
memory. The date and time and the “TX MEM
SET” message will alternate on the lower line of
the display.
RX ON FAX 98%
TX MEM SET
2.
Press the
key.
1.MEMORY TX
/1-9
3.
Press the
key.
SET NEW ACTIVITY
4.
Press the
{ y NH\V
PRINT SETTINGS
,
Only to print the settings of one of the transmis-
sions set in the memory, press the
key
and then
{ yWR FKRRVH WKH PHPRU\ WUDQ
s-
mission you wish to print and then the
key. Having completed the printout, the fax ma-
chine automatically returns to the initial waiting
mode.
,
If you wish to change, repeat or cancel a one of
the transmissions set previously, continue as
described below.
5.
Press the
{ y NH\V WR GLVSOD\ RQH RI WKH
other two available options: "CANCEL SET-
TINGS" or “MODIFY SETTINGS”. The example
shows “MODIFY SETTINGS”.
MODIFY SETTINGS
6.
Press the
key.
DOC.N. #XXXX
7.
Press the
{ y NH\V DJDLQ WR FKRRVH ZKLFK RI
the memory transmissions set is to be changed
or cancelled and then press the
key to
confirm your choice.
,
If you choose “CHANGE PARAM.”, continue
as indicated in steps 7 and 8 of the procedure
“Transmitting a document using the memory
immediately or at a preset time (delayed
transmission)”.
,
If the transmission from memory has already
begun, the message “NOT ALLOWED” will be
displayed. In this case, as already stated, it
can only be modified if it is a broadcast trans-
mission, between transmission to one user and
the next.
,
If you choose “CANCEL SETTINGS”, the fax
machine will clear the setting and the corre-
sponding document from the memory and then
return automatically to the initial waiting mode.
