T
ELEPHONING
55
TELEPHONING
If there are no documents in the ADF, the machine
is to all intents and purposes a conventional tele-
phone. When you connect to the line by lifting the
handset, you may use all telephone features that
are common to all telephones available commer-
cially.
These include the R function (REGISTER RECALL,
which can be activated by pressing the R key), which
will give you access to the special services provided
by the telephone network manager.
You may also:
•
Call the remote party using the programmed
one-touch dialling procedure (see "Telephoning
using one-touch dialling" and "Telephoning
using speed dialling"),
•
Put a telephone call on hold temporarily by
pressing the key "
" (HOLD). The line will be
reconnected as soon as the same key is pressed
again,
•
Recall one of the last 10 numbers dialled (out-
going) or one of the last 20 numbers received
(incoming) without having to dial the number
again.
IMPORTANT WARNING:
If the TX PROTECTION function has been en-
abled on your fax machine (see “Security Fea-
tures”), only people who know the password can
use it as a telephone.
TELEPHONING WITH ONE-TOUCH DIALLING
Procedure:
Î
i.e.:
When the required numeric key is pressed (01, in the
example), the display will show the telephone num-
ber associated with it (see "Programming one-
touch, speed and group dialling" in "Transmitting
and receiving"). If a name has already been stored,
the display will show it.
If the remote party is free, lift the handset to speak
as soon as they reply.
TELEPHONING WITH SPEED DIALLING
Procedure:
➨
➨
➨
➨
i.e.:
When you press the
key followed by a speed
dial code (01 in the example), the display shows the
telephone number associated with it (see "Pro-
gramming one-touch, speed and group dialling",
in "Transmitting and receiving"). If a name has
already been stored, the display will show it.
Press the
key to start dialling.
Once the number has been dialled, if the remote
party is free, you will be able to speak.
