68 K
EEPING THE FAX MACHINE IN GOOD WORKING ORDER
KEEPING THE FAX MACHINE IN GOOD WORKING ORDER
To ensure that your fax machine works correctly, read also the recommendations at the beginning of this manual.
These recommendations concern replacement of accessories (monochrome print head) and periodic cleaning of
the following parts:
•
print head nozzles
•
print head electrical contacts
•
print head pad
•
optical reader
•
casing
and the removal of documents jammed in the ADF and paper jammed in the ASF.
For solving minor problems, refer to the appropriate section of this chapter.
REPLACING THE PRINT HEAD (“OUT OF
INK”)
When the ink in the cartridge runs out, the display
shows the message “OUT OF INK”. At this point you
must change the print head.
1.
Press the
key. The display will show:
“CHANGE HEAD: PRESS RESUME”.
The
key is NOT active during print opera-
tions. To move the print head carriage, you
should press it only after the print operation is
completed.
2.
Lift the print head compartment cover in the di-
rection indicated by the arrow.
3.
Release the print head, pushing the lever in the
direction indicated by the arrow (towards the
back print head compartment).
While replacing and inserting the print head, take
care not to move the print head carriage.
