Operating manual
for the user
EPANA 6 kW
EN
●
Do not allow any materials other than the pellets specified
above to get into the burner trough! Burning other flamma-
ble materials or waste causes damage to the pellet fireplace
and results in invalidation of the warranty!
●
Never use flammable liquids such as petrol, lamp oils similar
to petrol, petroleum, firelighters, or similar liquids to kind-
le or “reignite” a fire! And make sure that such liquids are
a sufficient distance away from the pellet fireplace during
operation!
●
Pellets may never be manually placed into the burner
trough, with the following exception: if the reservoir has
run empty, a handful of pellets must be poured into the
burner trough towards the igniter. Otherwise, only the pel-
let duct will be filled within the filling period in the start
phase and only an insufficient pellets will fall into the bur-
ner trough.
Fig. 3.5
Never use flammable liquids
Fig. 3.6
Maintain a sufficient distance
from flammable liquids
Fig. 3.7
Do not manually pour pellets into the burner trough except if the
reservoir has run empty
Attention! Damage to the surface of the coating!
The pellet fireplace is coated with a high-quality tempera-
ture-resistant coating which only reaches its final strength
after being heated for the first time.
●
You therefore should not place anything on the tiled pel-
let fireplace or touch the surfaces as this may damage the
coating!
●
Never place the pellet sack on the hood!
●
Make sure that packaging does not touch the hot surfaces
when pouring in pellets as the packaging residue can be-
come burned into the surface of the coating!
Fig. 3.8
Do not place the pellet sack on hot surfaces while filling
We reserve the right to make technical changes
43
