22
- Remove and swap back panel (E) and side panel (G) (see
Fig.3+4).
Attention: The side panel needs to be rotated by 180°.
- Refit back and side panel firmly at the top and the bot-
tom of the unit using the fastening screws (A-D).
- Knock the cover for the stove pipe connection and the
cover for the combustion air line connection out of the
back panel (E) (see Fig.4).
- Swap the top connection duct and the side sealing
cover.
- Swap the bottom combustion air duct and the side seal-
ing cover.
E G
Fig.3
G E
Fig.4
