LEVEL
DRIVE
GAIN
TONE
HIGH CUT
LOW CUT
OUTPUT
INPUT
9-18V DC
MADE IN SWEDEN BY
Olsson
AMPS
-
+
Important Safety Instructions
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
7 Do not install near heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.
8 Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
Warning!
•
To reduce the risk of fire or electrical shock, do not expose this equipment
to dripping or splashing and ensure that no objects filled with liquids, such
as vases, are placed on the equipment.
•
Do not install in a confined space.
Service
•
All service must be performed by qualified personnel.
Caution:
You are cautioned that any change or modifications not expressly approved in
this manual could void your authority to operate this equipment.
When replacing the battery follow the instructions on battery handling in this
manual carefully.
Congratulations
on your purchase of ”The Wizard Overdrive”, a versatile overdrive pedal
producing low to medium-high drive tones.
The Wizard Overdrive has a very efficient Tone control and together with its
High Cut and Low Cut control you have full control over its tonal charac-
teristics. Due to its design with input and output buffers it can be used
anywhere in your pedal chain without affecting the tone and you can also
add boosters/overdrives in front of it with tremendous result.
The Wizard Overdrive has two gain stages, with separate level controls
for each, making it easy to get the exact type of overdrive you like.
5
6
8
9
10
1
2
7
4
3
1 - Output jack
2 - Tone control
3 - Level control
4 - Drive control
5 - Power in (9-18VDC)
6 - Gain control
7 - High Cut control
8 - Low Cut control
9 - Input jack
10 - Effect On/Off (true bypass)
Summary of Contents for overdrive
Page 1: ...USER S MANUAL 1 0 Olsson...
