84.
Attach both the
Horizontal Door Trim
(32”)
and
Horizontal Narrow Wall Trim (8”
)
with 4 and 2 - finishing nails.
85.
Locate
Horizontal Gable Trims
for both
front and rear of shed. Position equally over
gable and wall seam.
86.
Use 8 - 1 1/2” finishing nails per piece to
secure. Complete Rear. Attach
Facia Detail
Plates
over Horizontal Gable Trim seam and
attach with 4 - 1 1/2” finishing nails.
Angle cut
on 1 end
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com sales@outdoorlivingtoday.com
Page 35
87.
Assemble
Flower Box
Kit
with Assembly
Instructions included. Position completed Flower
Box below bottom of window trim and secure with
2 - 2 1/2” screws. Screw from inside of box into
the center wall stud. Attach second screw 2”
underneath first screw and once again into the
wall stud. Install Flower Box Kits underneath
each window.
88.
Attach Interior
Vertical and Horizontal Door Stops
to door framing from inside of shed.
Use 4 - 2” screws to secure each Stop. Stops should overlap door by approx. 1/2”
Vertical Door Stops
Horizontal Door Stop