1-888-658-1658 www.outdoorlivingtoday.com sales@outdoorlivingtoday.com
Page 17
37.
Locate Gable Trims. Gable Trims (Top) have a
22.5° cut at the top to match Gable Ceiling Trims.
Gable Trims (Bttm.) have a straight cut end and a
bevel cut end. Gable Trim (Bttm.) will need to be
chopped at the bottom to fit your ceiling position.
Both pieces have a bevel cut where they meet in
the middle. Attache each piece with
3 - 1 1/2” Finishing Nails
. Cover remaining seams
on front walls.Complete front and rear of shed.
Hardware
N1
- 1 1/2”
Finishing Nails
x 24 total
Parts
10C - Gable Trims (Top)
(1/4” x 2” x 55”)
x 4
11C - Gable Trims (Bttm.)
(1/4” x 2” x 55”)
x 4
36.
Locate Gable Ceiling Trims. Position against
gable wall siding and bottom of ceiling plywood. Trims
will butt up against Ridge Cap Sleeves and Horizontal
Side wall Trims. Attach each piece with
6 - 1 1/2” Finishing Nails
. Complete front and rear of
shed.
Hardware
N1
- 1 1/2”
Finishing Nails
x 24 total
Parts
8C - Gable Ceiling
Trims
(1/4” x 2” x 71 1/4”)
x 4