Outdoor Living Today www.outdoorlivingtoday.com sales@outdoorlivingtoday.com
Page 36
D1.
There are 3 different plywood roof panel sizes required to complete roof.
48” wide x 32” deep x 2 pcs.
48” wide x 21 3/4” deep x 2 pcs.
4” wide x 53 3/4” deep x 1 pc.
Starting with front left, position a 48” wide x 32” deep panel on rafters.
Plywood will overhang outside rafter by 2”. In the front, plywood will be
recessed 1/8” back from rafter end.
48” wide
32” deep
2” overhang
Sits on outside of
middle rafter 1”.
D. Roof Section - PLYWOOD
Exploded view of all parts necessary to complete the Rafter and Roof Section. Identify all parts
prior to starting.
Small Plywood
Roof Panel (2)
Large Plywood
Roof Panel (2)
Center Plywood
Roof Panel (2)
Roof Section will be installed the same way for both GardenSaver and
SpaceSaver. When following assembly steps keep your desired roof slope in
mind relative to the door.