Toll Free 1-888-658-1658 www.outdoorlivingtoday.com sales@outdoorlivingtoday.com
Page 47
Hardware (Step 88)
SB1 - 3/4” Black Screws
x 16 total
Y3 - Black Handle
x1
Y4 - Black Barrel Bolt
x1
Y5 - Silver Barrel Bolt
x1
88.
Attach
Door Handle, Exterior Barrel Bolt and Interior Barrel
Bolt
to door.
Handle
is positioned on top door,
Barrel Bolt
on bottom
door, and
Interior Barrel Bolt
(silver) on top door stud. Attach
Black
Barrel Bolt
as illustrated above with
4 - 3/4” Black Screws
. Note how
female part of Barrel Bolt is positioned higher than male part. Do a dry
run first to position
Barrel Bolt
correctly. Important: Drill pilot holes with
1/8” drill bit prior to securing to prevent wood from splitting.
89.
Attach
Horizontal Door Stop
and
Vertical
Door Stops
to
door jamb and wall framing. Use
4 - 2” screws
to secure
Horizontal Stop
, and
6 - 2” screws
per
Vertical Stop
. Door
Stops should overhang the door by approximately 1/2”. Start with
the Horizontal Stop first.
Parts (Steps 89)
Horizontal Door Stop
(1/2” x 2 1/2” x 35 1/4”)
x 1
Vertical Door Stop
(1/2” x 2 1/2” x 72”)
x 2
Hardware (Steps 89)
S3
- 2” Screws
x 16 total