62.
Before fully fastening
Metal Roof Panels
down, remove the
Metal
Roof Hangars
and insert
Foam Enclosures
between
Metal Roof
Panels
and
Battens
at the bottom of the roof. Enclosures will prevent
moisture and unwanted bugs, etc from entering your shed through here.
Parts (Step 62)
Foam Enclosures
(Several Pcs)
Important:
Remove Metal
Roof Hangars
63.
Using
12 - 2” Metal Screws
and 1/4” Nut Driver, secure
Metal
Roof Panels
down to lower 2 rows of
Battens
. Leave the top row unse-
cured for now to secure Ridge Cap later in
Step 66
. Tighten screws in
middle row that were partially secured in
Step 61
. Do not overtighten!
Hardware (Step 63)
2” - Metal Roof Screws
x 12
total
Screw into center of
Battens.
64.
Repeat Steps 58 - 63 to compleete opposite side of Metal Roof.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com sales@outdoorlivingtoday.com
Page 35