Attach Black Tee Hinges
with 3/4” & 2” Black
hardware provided
Note:
illustration of Hinge may not be accurate.
The # of screw holes in the hinge may vary from three to four depending on model.
3/4” Screw
2“ Screws
Bottom of Door
3/8” gap on side,
1/2” gap at bottom.
2” Black Screws
Front Bottom Skirting
66.
Attach Door Hinges to both
Left
and
Right Side Double Doors
. Position Hinges
equally on door trim as shown above and
attach with Black 3/4” and 2” screws.
Parts (Steps 66 - 68)
Left Side Door
(31 1/2” x 72”)
x 1
Right Side Door
(31 1/2” x 72”)
x 1
Hardware (Steps 66 - 68)
Y1
- Tee Hinges
x 6 total
SB1
- 3/4” Black Screws
x 6 total
SB2
- 2” Black Screws
x 30 total
67.
Next, position and secure the Double Doors. Starting with
Right Side Door
, position so there
is a 1/2” gap on bottom and approximately 3/8” on the side. Use a spare Shingle to shim door in place
at the bottom. Secure hinges to Door Trim with
3 - 2” Black Screws
per hinge.
Hint:
Do not attach
all the 2” screws until both doors are positioned correctly into place. Use Screw Driver to tighten
screws completely.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com sales@outdoorlivingtoday.com
Page 37