Toll Free 1-888-658-1658 www.outdoorlivingtoday.com sales@outdoorlivingtoday.com
Page 14
24.
Locate all Corner Rounded Trims. Rear
Corner Tops are angle cut 11 deg. Attach in
corner with
8 - 1 1/2” Finishing Nails
. Front
Corners use 2 peices (70” & 32” with 11 deg.
cut top). Attach with
10 - 1 1/2” Finishing
Nails
.
Hardware
N1 - 1 1/2” Finishing
Nails
x 36 total
Parts
3F - Rear Corner Rounded Trim
(85 3/8” with 11 deg. one end)
x 2
3G - Front Corner Rounded Trim
(70” Straight Cut)
x 2
3H - Front Corner Rounded Trim
(32” with 11 deg.cut one end)
x 2
25.
Locate all Horizontal Wall Trim.
Starting with sides, attach against
plywood ceiling and wall. with
6 - 1 1/2” Finishing Nails
.per piece.
Complete Rear and Front Horizontal
Trim by attaching with
6 - 1 1/2” Finishing Nails
per piece.
Hardware
N1 - 1 1/2” Finishing
Nails
x 48 total
Parts
3I - Side Wall HorizontalTrim
(1/4” x 1 1/2” x 45 1/2” - 11 deg ends)
x 2
3J - Side Wall HorizontalTrim
(1/4” x 1 1/2” x 44 3/8” - 11 deg ends)
x 2
3K - Front/Rear Wall Hor.Trim
(1/4” x 1 1/2” x 64” - Straight Cut)
x 4
Side Wall Horizontal Trim
Rear Horizontal Trim
Front Horizontal Trim
