Page
11 from
1
4
Dimensions in mm
Dimensions in mm
Mounting hole spacings
Errors can occur if for any reason the
communication between the two devices is
disrupted.
The screen of the thermostat will
show the message
(
Communication
Error), the backlight of the screen will blink.
COMMUNICATION ERROR
The interruption of the mains voltage
causes the interruption of communication
between the two devices. When the voltage
is restored, the peripheral device-receiver
activates the outputs according to the state
before the interruption,
until
the
communication
is automatically restored
with the thermostat (maximum delay of 6
minutes), so the outputs will change
according to the new commands that will be
given.
Mounting hole spacings
8
1,3
2
7,3
12
1,5
10
5
10
5
19
19
80mm
120mm
120mm
34mm
Wi
940851000_09_010
