Date 29/6/2021
Document number 921100409_09_002
Page 68 of 73
68 / 73
Calculation of the required section of the cable: Select the length of the cable.
On the left column the results are shown. At the top of the screen there are bars changing color
depending on the result and at the bottom of the screen there is a detailed table with the results based
on the selections we made.
7.3
Battery Calculation
From the menu select TOOLS > BATTERY CALCULATION and the picture below is appeared:
It calculates the required battery for the duration of 72 hours of standby and the remaining power for 30
minutes of alarm according to the standards of EN-54 series.
If we want to calculate the required battery for future installation, we have to create a virtual installation
through the program and we have to select battery calculation.
8 BSR-1000/MAR Repeater panel
8.1
General
The BSR-1000/MAR is a repeater for BSR-100x/MAR series panels and allows the general monitoring of
the system. The BSR-1000/MAR through its build-in screen and keypad can show panel network events,
current and recorded, and user can perform basic control such as
Reset, Evacuate and Siren silence.
