Date
27/06/2019
Document number
921100400_09_002
Page
30 of 67
30 / 67
4 Installation
The following chapter contains useful information for designing and calculating the installation,
describing the connection between the control panel and the detection devices and sirens, as long as the
connection of the relay outputs, panel network and more.
All installation technicians shall be fully informed of the following chapter prior to any installation of the
BSR-100X Analogue Addressable Fire Alarm
system. Complete knowledge of the system’s capabilities,
functionality and design is necessary to ensure proper operation of the fire detection system.
All the following connections must be made while the control panel is deactivated, disconnected
from mains power supply and batteries.
4.1
Safety
To ensure proper use of a device all accompanying documents must be read carefully.
This product must be installed, commissioned and maintained by
trained technician personnel
in
accordance with:
•
The regional regulations for the installation of electrical appliances in buildings
•
The regional Fire Safety regulations
•
Manufacturer's instructions
-The device mains power supply is rated at 220-240V AC / 50-60Hz, being a
Class
I
product (the
corresponding terminal contact with the “Protective Earth”
marking, inside the device, must be
connected to the bulding’s ground to ensure proper function and safety).
-
The mains power supply to the device must be connected to the existing building’s electrical
installation, with its own separate power line and circuit-breaker, labeled with
"Fire Detection System -
Do not switch off"
.
The control panel programming can be made partially via the technician menu without the use
of external devices. Some settings can be made via PC with the use of a web browser but for
fully accessing all of the control panel’s capabilities the programming must be made via USB
connection with the use of the PC software application BSR-100X. The program is free of
charge and can be downloaded from the official site of Olympia Electronics S.A..