Date
9/7/2018
File
BSR-2114/MAR
Document Number
921211401_09_002
Page
37 από 74
37
4.2.1
Enable – Disable menu
With the Enable option we can enable any element of the panel as shown in figure 4-7.
Figure 4-7
Activation Menu
We have the following selections :
ALL SYSTEM
: All the elements of the panel are enabled
LOOPS
: Select from 1 to 8 which loops you want to enable.
POINTS
: Select the loop and then the point that you want to enable.
ZONES
: Select which zone you want to enable ( 1 – 96 ). If ALL is selected then all zones are enabled.
AUX RELAY
: Select which of the 6 relays do you want to enable.
SIRENS
: Select 1 of the 8 sirens that you want to enable.
Respectively in the disable menu we have the same selections as the enable menu but now we can use them to disable
elements.
4.2.2
Properties menu
With the use of this menu, the user can read the settings of every element in the panel. This menu has the following
functions:
OF POINTS
: See the setting of a point.
AUX RELAYS
: See the setting of each relay.
OF SIRENS
: See the settings of each siren.
TASKS
: See the settings of each function.
GROUPS
: See the settings of each group.
In the properties menu we cannot make any changes to the panel. It is used only for viewing information.
If we select the POINTS option then a window similar to the one shown in figure 4-8 will be shown.
