Page
4 from
4
Battery replacement
.
It can be done only by a competent person and after the mains interruption
.
1.
Remove the luminaire from the suspended ceiling (figure 3).
2.
Follow the step
1
of the installation
instructions
.
3
. Disconnect the connector and remove the old battery.
4
. Connect the new battery with the same type (step
2
of the installation
instructions
) and place it in
the position of the old one.
5
.
Replace the removed parts (step 1 and 4)
and power the device.
LED MODULE CHARACTERISTICS
Manufacturer
Model Number
Voltage Range
Connections
Nominal Power
Temperature (tc)
Olympia Electronics S.A
60 °C max. across the board
45 °C max. across the board
Non reversible connection between main pcb and led module
5.8-6.2V DC
1.3W
1W
1903175
GR-27
0
GR-271
GR-272
GR-273
WARRANTY
Olympia Electronics guarantees the quality, condition and operation of the goods. The period of
warranty is specified in the official catalogue of Olympia Electronics and also in the technical leaflet,
which accompanies each product. This warranty ceases to exist if the buyer does not follow the
technical instructions included in official documents given by Olympia Electronics or if the buyer
modifies the goods provided or has any repairs or re-setting done by a third party, unless Olympia
Electronics has fully agreed to them in writing. Products that have been damaged can be returned to
the premises of our company for repair or replacement, as long as the warranty period is valid.
Olympia Electronics reserves the right to repair or to replace the returned goods and to or not charge
the buyer depending on the reason of defection. Olympia Electronics reserves the right to charge or
not the buyer the transportation cost.
HEAD OFFICE
72
nd
km
. Ο.
N.R.
Thessaloniki
-Κ
aterini
P
.
C
. 60
300
P.O. Box 06 Eginio Pierias
Greece
www.olympia-electronics.gr
info@olympia-electronics.gr
NOTE:
LED= Light Emitting Diode
LABELING EXPLANATION:
X:
Self contained
0:
Non maintained
(*)
A:
Including test device
90:
1.5 hour duration
180:
3 hours duration
(*)
Non Maintained operation: The luminaire lights its illumination source,
only in power
supply’s failure.
Maintained operation: The luminaire lights its illumination source, when it is powered by the
mains power supply or not
.
923270000_09_00
4
CAUTION
:
Do not view directly with bare eyes.
