Page 1 of 4
923760100_09_001
GR-7601 Ethernet Gateway
TECHNICAL CHARACTERISTICS
5 to 40 C
o
ABS/PC
868 - 870MHz
11dBm
-40 to 70 C
o
Up to 95%
2 years
EN 62311:2008, EN 62368-1:2014 +AC:2015,
ETSI EN 301 489-1 V1.9.2, ETSI EN 301 489-3 V1.6.1
ETSI EN 300 220-2 V3.1.1
197gr.
120
x
80
x
34
mm
Ambient temperature range
Housing
Storage temperature range
Maximum relative humidity
Dimensions (L x W x H)
Weight
Warranty
Approvals
Operation voltage
Consumption
Tx/Rx frequency range
Tx power
The
GR-7601
wireless emergency lighting. It transfers the received data from
the GR-7600 PC Software to the wireless network and vice
versa. One only Gateway can exist in each wireless network.
Ethernet Gateway is the master device of the
Thank you for your trust in our products
Olympia Electronics - European manufacturer
220 - 240 VAC (50 - 60Hz)
2VA
F
eatures
:
• Powered from
mains 220 - 240VAC
• Status and signal indication LEDs
• Ethernet port (RJ45)
• Webserver
• Fast 868MHz wireless connectivity
Default settings:
•
IP: 10.0.1.142
•
•
SID: 00000001
•
RF Channel: 13 (869.525MHz)
Technician menu password (webserver): 1000
Indications:
: Power On LED (Green).
: RF LED (Orange). Blinking when receiving data from the connected wireless devices
: Signal broadcasting LED (Orange). Blinking indicates Gateway transmissions (beacon).
.
Button functions*:
•
• Long press (>1s and <10s): Reset Gateway.
• Extended press (>10s): Load default settings to the Gateway**.
*
The Button is only accessible when the front cover is removed. See schem. 2 - Wiring on page 4.
**Resetting to defaults will restore all changes made by the user to the Gateway, except the SID and
the RF Channel. In order to set SID and RF Channel back to default values, you will have to set the
values manually via the GR-7600 software.
Short press (<1s): Send status message to the Master PC (through Ethernet).
RF
