GR-7605/V2 RSSI Tester / USB Gateway
923760501_09_001
TECHNICAL CHARACTERISTICS
4.9V to 5.1V (USB)
0.7W
/ 0.14A
(max)
2 Hours
o
0 to 50 C
ABS/PC
o
-40 to 70 C
Up to 95%
2 years
117gr.
110 x 71 x 28 mm
Ambient temperature range
Housing
Storage temperature range
Maximum relative humidity
Dimensions (L x W x H)
Weight
Warranty
Battery Type
Approvals
Operation voltage
Consumption
Duration
Page 1 of
5
·
•
Spectrum Analyzer
The
GR-7605/V2
multifunctional device has
4
operating modes:
·
•
Installation Tool
Download the software Wireless Installation Tool from:
RSSI Tester mode operates handheld, powered by internal
rechargeable battery. Installation Tool, USB Gateway and Spectrum
Analyzer modes need an active USB connection with
a PC running
the “Wireless Installation Tool” software application (included in
Phos4.0).
“link”
·
•
RSSI Tester
·
•
USB Gateway
• System status indication
• Portable (RSSI Tester mode) or wall-mounted (other)
• Auto power-OFF function (after 10' of inactivity)
F
eatures
:
• 2 hours duration
• Rechargeable Ni-MH battery
• 5 LED bar with dual indication (SYSTEM / RSSI)
• 1x Mini-USB port
• 5h charging => 90% of full charge
Lower LED indications:
•
Blinks when on USB Gateway / Installation Tool modes
•
ON when on RSSI Tester / Spectrum Analyzer modes.
•
ON when RSSI Tester / Spectrum Analyzer modes.
• SID = 00000001 • RF Channel = 2 (868.150MHz)
•
Blinks when receiving data on USB Gateway / Installation Tool modes,
Default settings:
: Signal (beacon) LED (Green):
: RF/Rx LED (Green):
3.6V / 240mAh NiMH (rechargable, non-replaceable)
EN 62311:2008, EN 62368-1:2014 +AC:2015, ETSI EN 301 489-1 V1.9.2,
ETSI EN 301 489-3 V1.6.1, ETSI EN 300 220-2 V3.2.1
USB
LOW CUT
SYS
CHA
RF
RF
I
III
II
IIII
IIIII
RSSI TESTER
868MHz
11dBm
Tx/Rx frequency range
Tx power
