Dismantle the device carefully using a flat bladed screwdriver
.
Mount the plastic base on the wall (the test button must be
facing downwards) using the included mounting accessories in
points B and C.
Pass the mains cables through the hole (point A) and
secure it
with a
suitable bracket
(not included)
to ensure immobilization
of the cable at a distance of
no more than 5cm from the
luminaire
’s
cable
entry.
ATTENTION!! To maintain the IP rating,
the outer diameter of the power cable must be at least 8.2 mm².
923378005
_09_009
Installation instructions
Non maintained
operation
Maintained
operation
2
1
2
3
4
