2. Long press (>2"): Loads factory default
settings to the module.
Button functionality:
The on-board button has the two following
functions:
1. Short press (<2"): a status message will
be sent to the Gateway device of the
wireless network.
Button
LD3
LD2
LD1
Antenna
• SID: 00000001
Default settings:
• RF Channel: 13 ( 869.525MHz )
1. Very fast flash [5 times/s]: received signal
strength is excellent.
3. Moderate flash [1 second ON / 1 second
OFF]: received signal strength is acceptable
for reliable
communication.
3. Fast flash [2 times/s]: The device has
5. No light: The device is disconnected.
1. Very fast blink [5 times/s]: the module is
not initialized correctly. In this case you
have to press for more than 2 seconds the
push button, in order to reset the module
(loads default settings).
established connection to a Router device
and at
least one more Router device is
available on the same hop level, as an
alternate route (redundant connection).
The
bottom LED
(LD1-red) indicates
operation status.
(false condition).
This LED may blink according to the
following patterns:
The
middle LED
(LD2-green) indicates the
received signal strength (RSSI) of the router
module.
2. Rapid flash [5 times/s]: The device has
established direct connection to a single
Gateway device.
1. Steady ON: The device has established
direct connection to a Gateway device, and
at least one more Gateway device is
available for alternate routing
Wireless
Communication
LED
indications (interior)
The
top LED
(LD3-green)
indicates the
network connection status.
This LED may blink according to the
following patterns:
4. Moderate flash [1 second ON / 1 second
OFF]: The device has established
connection
to a single Router device, and
no alternatives exist on the same hop level.
This LED may blink according to the
following patterns:
2. Fast flash [2 times/s]: received signal
strength is good.
4. Very slow [2 seconds ON / 2 seconds
OFF]: received signal strength is not
acceptable
for reliable
communication, or
no signal.
2. Moderate flash [2 times/s]: The module
is properly operating.
Page
3 from 5
923037016
_09_00
1
