923500000_09_003
923500000_09_003
4
5
OLY-500
220-240V AC / 50-60Hz
3.4W / 3.6VA
OLY-500
Olympia Electronics S.A.
2.9-3.6V DC
780mW
40 °C max. across the board
2102205
Warranty
Olympia Electronics guarantees the quality, condition and operation of the goods. The period of warranty is
specified in the official catalogue of Olympia Electronics and also in the technical leaflet, which accompanies
each product. This warranty ceases to exist if the buyer does not follow the technical instructions included in
official documents given by Olympia Electronics or if the buyer modifies the goods provided or has any repairs
or re-setting done by a third party, unless Olympia Electronics has fully agreed to them in writing. Products that
have been damaged can be returned to the premises of our company for repair or replacement, as long as the
warranty period is valid.
Olympia Electronics reserves the right to repair or to replace the returned goods and to or not charge the buyer
depending on the reason of defection. Olympia Electronics reserves the right to charge or not the buyer the
transportation cost.
72nd km. O.N.R. Thessaloniki-Katerini
P.C. 60300 P.O. Box 06 Εginio Pierias Greece
www.olympia-electronics.gr
info@olympia-electronics.gr
Warranty
Technical Characteristics
LED Characteristics
MANUFACTURER
MODEL NUMBER
VOLTAGE RANGE
CONNECTIONS
NOMINAL POWER
TEMPERATURE (tc)
OPERATION VOLTAGE
MAXIMUM POWER CONSUMPTION
3.6V/1Ah
BATTERY (Ni-Cd)
From overcharge and deep discharge
BATTERY PROTECTION
3 hours
16 white LEDs
CHARGE TIME
MINIMUM DURATION
LIGHT SOURCE
24 hours
Battery charge indication LED, TEST button
38lm / 100lm
IP42
25m
VIEWING DISTANCE (as safety sign)
DEGREES OF COVER PROTECTION
OPERATION TEMPERATURE RANGE
LUMINOUS FLUX (MAINS / EMERGENCY)
o
5 to 40 C
ABS/PC, PC
620gr.
RELATIVE HUMIDITY
CONSTRUCTION MATERIAL
EXTERNAL DIMENSION (L x W x H)
WEIGHT
GUARANTEE
Up to 95%
3 years (1 year for the battery)
INDICATIONS
EN 60598-1, EN 60598-2-22, ΕΝ 55015,
ΕΝ 61547, ΕΝ 61000-3-2, ΕΝ 61000-3-3
PRODUCED IN ACCORDANCE WITH
NOTE:
LED= Light Emitting Diode
LABELING EXPLANATION:
X:
Self contained
1:
Maintained operation
(*)
A:
Including test device
G:
Internally illuminated safety sign
180:
3 hours duration
(*) Maintained operation: The luminaire lights its illumination source, when it is powered by the mains
power supply or not.
Non Maintained operation: The luminaire lights its illumination source, only in mains power supply’s
failure.
NOTE!!
The installer should fill in, on the specification label, the letter
G
if the luminaire is used as a safety
sign.
X 1
8 0
A
1
G
ATTENTION!!!
CAUTION : Do not view directly with bare eyes.
OLY-500
MAINTAINED/NON MAINTAINED
EMERGENCY LUMINAIRE
IP42
European
manufacturers
Non
maintained
NM
Thank you for your trust in our products
Olympia Electronics - European manufacturer
25m
Maintained
Μ
100lm
Light output
3h
Duration
Manual Test
Lens Removal
2
2
1
3
1
Non reversible connection between main pcb and led module
270 x 147 x 48 mm
The light source contained in this luminaire shall only be replaced by the manufacturer, or
his agent, or a similar qualified person.
NOTE!
! The light source is non-user replaceable.
2
2
1
1
