product which can be found on the market.
- Unscrew the cap 1 and using the funnel d and the jug g pour the water into the boiler checking
that the water in the water level indicator 11 does not go over the top arrow. Add a little
decalcifying product as indicated in the instructions.
- Screw the cap 1 back on well. Plug the machine in. Turn on the steam knob 3. Press switch 4.
Wait until a little steam comes out of the steam spout 12 and then turn off the steam knob 3.
Leave the machine on for about two or three hours during which time the steam knob 3 must be
opened and closed two or three times at intervals. Also let a little water out through the unit 10
by putting the jug
g
under it and pressing the switch 6.
- Turn off the machine by pressing switch 4. Unplug the machine, turn on the steam knob 3 and
let all the steam out, then turn off the steam knob 3.
- Remove the water container under the lid 2. empty, rinse and replace it.
- Unscrew the boiler cap 1, turn the machine upside down and let all the water flow out of the
boiler through the hole under the boiler cap 1. Rinse the boiler well with cold water.
- Repeat exactly the same procedure as above but using only water without the decalcifying
product.
- To use the machine again follow the instructions under the heading "STARTING PROCEDURE".
- If in your area the water contains a lot of calcium, we recommend the use of non-sparkling
mineral water.
WE RECOMMEND that you keep the original packaging and use it to send the machine.
We hope that these instructions will help you use your machine correctly and we hope you will
enjoy delicious coffees, "cappuccini", teas and other drinks of your liking.
Summary of Contents for EXPRESS MAXIMATIC
Page 1: ......
