OLYMPIA TOOLS INTERNATIONAL, INC.
Tel. 626-336-4999 / Fax. 626-336-489 / Web. www.olympiatools.com
Page 3
Specific Safety Rules for This Product
1. Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and
safer at the rate for which it was designed.
Do not use the power tool if the switch does not turn it on and off. Any powertool that cannot be controlled with the switch
is dangerous and must be repaired.
3. Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments,
changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power
tool accidentally.
4. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these
instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
5. Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and
any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use.
Many accidents are caused by poorly maintained power tools.
6. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and
are easier to control.
7. Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working
conditions and the work to be performed. Use of the power tool for operations different from those intended could result
in a hazardous situation.
Power Tool Use and Care
1. Tool service must be performed only by qualified service technician. Any service or maintenance performed by unqualified
personnel can result in personal injury and property damage.
2. When servicing a tool, use only identical Replacement parts. Follow instructions in the “Inspection, Maintenance,
And Cleaning ”section of this manual. Use of unauthorized parts or failure to follow maintenance instructions may create
a risk of electric shock or injury.
1. Maintain labels and nameplates on the Drain Cleaner. These carry important information.
2. Wear ANSI-approved safety impact eye goggles and heavy duty work gloves when using the Drain Cleaner.
Never grasp a rotating cable with a rag or cloth glove. Using personal safety devices reduce the risk for injury.
3. Avoid unintentional starting. Make Sure you are prepare to begin work before turning on the Drain Cleaner.
4. Do not force the Drain Cleaner. This tool will do the work better and safer at the speed and
capacity for which it was designed.
5. Maintain a safe working environment. Keep the work area well lit. Make sure there is adequate surrounding workspace.
Always keep the work area free of obstructions, grease, oil, trash, and other debris. Do not use a power tool in areas near
flammable chemicals, dusts, and vapors.
6. Unplug the Drain Cleaner from its electrical outlet before performing any inspection, maintenance, or cleaning procedures.
7. Do not leave the Drain Cleaner unattended while running. Turn power off if you have to leave the Drain Cleaner.
8. Do not allow the cutter to stop turning while the machine is running. This can overstress the cable and may cause twisting,
kinking or breaking of the cable. Twisting, kinking or breaking cable may cause striking or crushing injuries.
Service
