Page 9
the groove on the housing and push the slide in place. Then, be sure to
insert it to the bottom until there is a clicking sound; otherwise, the battery
pack will fall off from the battery pack, which might cause injury to the
operator or the others.
4. Do not push too hard when inserting the batch pack. If the battery pack
doesn’t slide smoothly, it may be caused by improper insertion.
(Fig.2)
Switch variable speed
Control the speed between 0~560RPM, exert pressure on the switch: the
greater the pressure, the higher the speed.
Flood light
Notice: do not stare at light or light source!
Pull the trigger to switch on the light. When the trigger is pulled, the light is on;
When the trigger is released, the light is off. (Figure3)
Ba ery pack
Bu on
