Page 13
2. If the flexible shaft is trapped in the pipe: that is, it cannot dredge or be
retracted, press the forward and reverse rotation button R, and pull the
handle forward to retract the flexible shaft.
3. Notice: Situations of pipe blockage are varied, it is necessary to
closely observe the situation of the flexible shaft when using it. If it is
distorted or blocked, stop the machine immediately, and then take
different operations according to the actual situation. If the pipe
cannot be dredged, please ask for professional for help. Do not force
the operation and cause unnecessary troubles.
How to replace the flexible shaft
Please check if the battery pack is unplugged before replacing it
！
6001L pipe dredger provides a quick flexible shaft replacement device.
1. Place the operating handle in the O position;
2. Take out the flexible shaft to expose the connector;
3. Unscrew the M4 set screws with an Allen wrench and remove the
unwanted flexible shaft (Fig. 9);
4. Insert the new flexible shaft into the connector, align the screw holes, and
tighten the M4 set screws again;
5. Push the flexible shaft manually to the inside of the drum.
Do not start the tool to retract the flexible shaft, because the exposed flexible
shaft can lead to unpredictable personal injury, tool damage, damage to
indoor objects, fire, electric shock and other dangerous situations.
If the flexible shaft cannot be replaced normally, please send it to the
designated service center for repair.
(Fig.9)
M4 screw
Connector
