WWW.OLYMPIA-TOOLS.CO.UK |
15
AFTER SALES SUPPORT
| +44 (0) 1904 727512
14
| 20V LI-ION CORDLESS COMBI DRILL
TECHNICAL SPECIFICATIONS
TECHNICAL SPECIFICATIONS
TECHNICAL SPECIFICATIONS
Noise/vibration information
Noise
A weighted sound pressure
L
pA
: 76.4dB(A)
A weighted sound power
L
wA
: 87.4dB(A)
K
pA
and K
wA
=3.0dB(A)
WARNING!
Wear ear protection when sound pressure is over: 80dB(A)
Vibration
Vibration total values (triax vector sum) determined according to EN 62841:
Drilling into metal
Vibration emission value a
h, D
= 1.083m/s²
Uncertainty K = 1.5m/s²
Impact drilling into concrete
Vibration emission value a
h, ID
= 8.973m/s²
Uncertainty K = 1.5m/s²
The declared vibration total value may be used for comparing
one tool with another, and may also be used in a preliminary
assessment of exposure.
WARNING!
The vibration emission value during actual use of the power
tool can differ from the declared value depending on the ways
in which the tool is used for example:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained.
Use of the correct accessory for the tool and ensuring
it is sharp and in good condition.
The tightness of the grip on the handles and whether any
anti-vibration accessories are used.
The tool is being used as intended by its design and as
detailed in this user guide.
This tool may cause hand-arm vibration syndrome
if its use is not adequately managed.
WARNING!
To be accurate, an estimation of exposure level in the actual
conditions of use should also take account of all parts of the
operating cycle such as the times when the tool is switched
off and when it is running idle but not actually doing the job.
This may significantly reduce the exposure level over the
total working period.
ALWAYS
use sharp chisels, drills and blades.
Maintain this tool in accordance with these instructions
and keep well lubricated (where appropriate).
If the tool is to be used regularly then invest in
anti-vibration accessories.
Avoid using tools in temperatures of 100C or less.
Plan your work schedule to spread any high vibration
tool use across a number of days.
Combi drill
Model
DF-1803 (CD20VLI)
Code
09-020
Max. torque
28Nm
Torque settings
18+3
Number of gears
2
No-load speed (gear 1/gear 2)
0-400/0-1350/min
Max. impact rate (gear 1/gear 2)
6000/20250bpm
Drill chuck
10mm/⅜" keyless
Max. drilling Ø (steel)
6mm
Max. drilling Ø (masonry)
10mm
Max. drilling Ø (wood)
20mm
Weight
1.50Kg
Battery pack
Model
DF20V1901
Battery voltage
20V
Battery capacity
1.5Ah LI-ION 30Wh
Battery pack charger
Model
XZ2200-0400WB
Input
100-240V~50-60Hz 0.3A
Output
DC22V
400mA
Charging time
3-5 hours
Protection class II
For indoor use only
