Accessories for the SECURE Series
Door/Window Contact
(Art. No. 5991)
Read the operating manual thoroughly and observe the
information. Keep the operating manual close by for
future reference.
Information on the Door/Window Contact
■
The door/window contact is designed for private use, in-
doors.
■
The door/window contact only works in combination with an
alarm system from the SECURE series.
■
The door/window contact must be installed within trans-
mission range of the base unit of the SECURE series alarm
system.
Safety Instructions
The following safety information applies to the entire document.
Read and observe all the warning information to protect yourself
and the environment from any harm.
Warning! This device can be used by child-
ren from the age of 8 and persons with
restricted physical, sensory or mental capa-
bilities or a lack of experience and knowl-
edge as long as they are supervised or have
been instructed with regard to safe use of
the device and are aware of the potential
risks involved with its use. Children must
never play with the device. Cleaning and
user maintenance may not be completed by
children without any supervision.
Warning! NEVER complete any repairs to the
device yourself. Contact our Service depart-
ment. The device does not contain any parts
which the user needs to repair or service.
Warning
! Risk of suff ocation! Children can
swallow small parts, packaging and protec-
tive foils. Keep the device and packaging out
of reach of children.
Attention! Risk of property damage through
the use of inappropriate batteries! The use
of inappropriate batteries can cause a loss of
function of the device. Only use batteries of
the type described in Section Technical Data.
Attention! Risk of property damage through
environmental infl uences! Prevent environ-
mental infl uences such as exposure to
smoke, dust, vibration, chemicals, moisture,
heat and direct sunlight.
Important! Before starting to position the sen-
sors, take into account that walls, ceilings and
sources of electrical disturbance can impair wire-
less communication.
Intended Use
The door/window contact serves to monitor the position of doors
and windows.
A condition for complying with the intended use is that the equip-
ment is installed correctly and the information in the manual is
observed and maintained. Any other use is considered unintend-
ed use.
Scope of Delivery
Please check the contents of the package carefully. If anything is
missing or has been damaged during transport, DO NOT put the
door/window contact into operation!
Door/Window contact
1
Batteries
2 x AAA batteries
Assembly material
Adhesive tape, spacers
Operating manual
1
General View
The illustration at the beginning depicts the door/window contact
in detail.
1
Magnetic contact
2
LED
3
Door/Window contact with transmitter
4
Battery compartment
5
Positioning aids
Installation
Important! Before starting to position the sensors, take into
account that walls, ceilings and sources of electrical disturbance
can impair wireless communication.
Use the assembly material supplied (e.g. to
compensate for height diff erences).
Pay attention that the surfaces to be ad-
hered to are free of dust and grease.
1
Assemble the door/window contact on
a window or door to be monitored as
illustrated.
2
Pay attention that the distance between
the magnetic contact and transmitter
is maximally 5 mm when the window/
door is closed.
Inserting the Batteries
1
Open the battery compartment by pressing the locking latch
downwards.
2
Replace to old batteries with new ones. Pay attention that the
new batteries are inserted the right way around.
3
Close the battery compartment and tighten the screw using
an appropriate screwdriver.
Registering a Sensor
You must register the door/window contact on the base unit.
When the door/window contact is triggered, it sends a signal to
the base unit and the base unit alarm sounds.
1
Press and hold the corresponding button on the base unit to
register sensors.
2
Trigger the door/window contact, e.g. by opening the window
or door being monitored.
Technical Data
Weight
Approx. 50 g
Dimensions (W x H x D)
100 x 22 x 15 mm
Radio frequency
868 MHz
Transmission power (max.):
0.05 mW
Batteries
2 x AAA batteries
Permissible
ambient conditions
-5 °C to +50 °C at
5% to 80% rel. humidity
Information on Disposal
The adjacent symbol indicates that electrical and
electronic apparatus and batteries no longer required
must be disposed of separate from domestic waste in
accordance with legal directives.
You are legally obliged to dispose of batteries and bat-
tery packs at shops which sell batteries or collection points which
provide the corresponding containers. Disposal is free of charge.
The symbols indicate that the batteries must not be disposed
of in normal domestic waste and that they must be brought to
collection points provided by local public waste authorities.
Packaging materials must be disposed of according to
local regulations.
Guarantee
Dear Customer,
we are pleased that you have chosen this equipment.
In the case of a defect, please return the device together with the
receipt and original packing material to the point-of-sale.
Cleaning and Service
1
Clean the surface of the housing with a soft, lint-free cloth.
Never use any chemicals or scouring agents.
2
Check the functionality of each sensor registered once a
month and after changing the batteries.
3
Change the batteries at least once a year or after receiving
the relevant message from the alarm system.
Information on Conformity
Olympia Business Systems Vertriebs GmbH, Zum
Kraftwerk 1, 45527 Hattingen hereby declares that this
device fulfi ls the basic requirements and other
relevant provisions stipulated in the Directive 2014/53/
EC. The CE mark on the device confi rms its conformity.
More detailed information on the Declaration of
Conformity is provided at
http://productip.com/?f=6f1ed or scan this QR code.
1
2
3
5
4
