18
appears and press “OK/INT” key.
z
Press or
key to select the submenu HS NAME
and press “OK/INT” key.
z
Enter/change the name of the handset (e.g. MOBIL 1).
Press “OK/INT” key to confirm.
Saving a Prefix
It is possible to save prefix numbers (max. 25 digits) in the
handset. This number is then recalled after pressing and hold
“0” key for 2 seconds.
z
Press key as often as necessary until the HANDSET
menu appears and press “OK/INT” key.
z
Press or
key to select the submenu PREFIX
MEM and press “OK/INT” key.
z
Enter prefix number (e.g. access code of the subscriber
you call most frequently) and press “OK/INT” key to
confirm.
Switching the Key Tone On/Off
z
Press key as often as necessary until the HANDSET
menu appears and press “OK/INT” key.
z
Press or
key to select the submenu KEY TONE
and press “OK/INT” key.
z
Press or
key to select the setting ‘On/Off’ and
press “OK/INT” key to confirm.
Activating/Deactivating Automatic
Call Answering
The automatic call answering function enables the incoming call
to be taken immediately when the handset is removed from the
base station.
z
Press key as often as necessary until the HANDSET
menu appears and press “OK/INT” key.
z
Press or
key to select the submenu AUTO ANS
19
and press “OK/INT” key.
z
Use or
key to switch automatic call answering on
or off and press “OK/INT” key to confirm.
Activating/Deactivating Call Timer
It is possible to display the call duration of a call on the handset.
The timer starts when the conversation begins.
z
Press key as often as necessary until the HANDSET
menu appears and press “OK/INT” key.
z
Press or
key to select the submenu CALL TIMER
and press “OK/INT” key.
z
Use or
key to switch the call timer on or off and
press “OK/INT” key to confirm.
Default Settings
If selected, the handset settings which you have changed are
returned to their default values. The phone book entries are
retained.
z
Press key until the HANDSET menu appears and
press “OK/INT” key.
z
Press or
key to select the submenu DEFAULT
and press “OK/INT” key.
z
Press “OK/INT” key to confirm.
Note: The display will switch back to standby mode.
Registering Additional Handsets
Further handset of the same model can be registered on one
base station.
z
Press key until the HANDSET menu appears and
press “OK/INT” key.
z
Press or
key to select the submenu REGISTER
and press “OK/INT” key.
z
Handset display shows “SEARCHING”.
z
Press and hold key on the base station more than
3 seconds until acknowledgement signal is heard.
