background image

 

26

Register handset 

 / 3-HANDSET / 

 / 

 or 

  /

8-REGISTER / 

 / 

Press and hold 

key on the base 

station more than 3 seconds until acknowledgement signal is 

heard

 / ENTER PIN / 0000 / 

 

Base settings 

 

Barring, disable and 
external 

 / 4-BASE / 

  / 1-BARRING / 

  / ENTER 

PIN / 0000 / 

 / 

 or 

 / 

 / 

  or 

  / DISABLE or EXTERNAL / 

 

Barring, number 

 / 4-BASE / 

  / 1-BARRING / 

  / ENTER 

PIN / 0000 / 

 / 

 or 

 / 

 / 

  or 

 / NUMBER / 

  / 321... / 

 

Entering emergency 
numbers 

  / 4-BASE / 

 or 

 / 2-EMERGENCY 

  / ENTER PIN / 0000 / 

 / 

 or 

  / 

321... / 

 

Set flash time 

 / 4-BASE / 

 / 

 or 

 / 3-FLASH TIME 

 / 

 or 

 / 

 

Changing dialing 
mode 

  / 4-BASE / 

 / 

 or 

  / 4-DIAL MODE / 

 / 

 or 

 / 

 

Changing PIN 

  / 4-BASE / 

 / 

 or 

 / 5- CHANGE 

PIN / 

  / ENTER PIN / 0000 / 

  / NEW PIN / 1111 

  / REPEAT / 1111 / 

 

Default settings 

  / 4-BASE / 

 / 

 or 

 / 6-DEFAULT / 

  / ENTER PIN / 0000 / 

 / CONFIRM? / 

Delete HS 

 /  4-BASE  / 

 / 

 or 

  / 

7-DEREGISTER / 

  / ENTER PIN / 0000 / 

  / 

 or 

 / 

 / CONFIRM? / 

 

 
 

 

27

Warranty and Accessories 

Warranty

 

In the case of a defect right after purchase, please return the 
device together with the receipt and original packing material to 
the point-of-sale. 
Please refer to warranty card for terms of warranty and 
information about authorized service centre(s). 

Accessories

 

Approved options and consumables, such as batteries, extension 
kits, headsets, etc., can be ordered from our authorized dealers. 

Technical Modifications 

This operating instruction manual serves purely for information 
purposes. Its content is not part of any contract of sale. 
All the data specified relates to nominal values. The equipment 
and options described may differ from country to country 
according to national requirements. 
 

For product support and after sales service in Hong Kong, 
please refer to the Hong Kong Warranty Card inside the 
Chinese manual. 
   
For product support and after sales service in Singapore, 
please contact 

 
SWISS SEAH DEPARTMENT STORE 
53, UBI AVENUE 1, #05-44, 
PAYA UBI INDUSTRIAL PARK, 
SINGAPORE 408934. 
TEL: 68441113    FAX: 68442349 
EMAIL: sales@swissseah.com.sg

 

 
 

Summary of Contents for 6101















Reviews: