14
number (e.g. 23).
z
Press “R” key once more can re-take the call again or
press
key to forward the call.
Note: The above information can vary according to the PABX
system used. Therefore, refer to the relevant information of the
PABX network.
Intercom Call Transfer
It is possible to put an external
call on hold and call another
handset registered to the base or to transfer calls.
z
Press “OK/INT” key to hold the external call and initiate an
internal call.
z
Input the desired handset number (e.g. 2).
z
The target handset will ring. After the internal connection
is made, press
key to transfer the external call.
z
If “OK/INT” key is pressed before another handset is
answered, the call transfer procedure will be cancelled
and the external call connection is regained.
z
If key is pressed before another handset is answered,
both the external and internal call will be disconnected.
Teleconference
After have received an external call, it is possible to include a
second handset in the conversation (three way conference).
z
Press “OK/INT” key and enter the number of the
corresponding handset (e.g. 2) which will join the
teleconference.
z
The external caller is kept on hold. As soon as the other
handset takes the call, example handset 1 can
intercom
with handset 2.
z
Only the initiating handset can start a 3 way conference,
press and hold “#” key 2 seconds.
z
By
pressing key, any of the handsets quit from the
teleconference and the other handset continues with the
external call.
15
Changing the Receiver Volume
z
Press or
key to change the receiver volume
during a call.
Paging the Handset
If a handset has been misplaced, it is possible to call all the
handsets.
z
Short
press key to page all the handsets registered to
the base. To stop the page call, press any key on the
handset or
key on the base station.
Entering a Dialing Pause (P)
If the telephone is connected to a PABX system, it may be
necessary to insert a dialing pause. To do this, press
key
after entering the relevant digit in the pre-dial buffer, e.g. 0, for
an external line (0P….). A “P” appears in the display indicating a
pause.
Switching the Key Lock On/Off
Incoming calls can still be received when key locked.
z
Press and hold “#” key for 2 seconds to activate or
deactivate the key lock. The icon
turns on or off.
Phone Book
The telephone can store up to 40 entries in the phone book with
name and call number. When the function is supported by the
telephone provider service and the caller, the handset displays
the name of the caller (when stored in the phone book).
Store Entries
z
Press key until the PHONE BOOK menu appears and
press “OK/INT” key.
z
Press or
key to select “NEW ENTRY” and press
“OK/INT” key.
z
Enter number (max. 25 digits) and press “OK/INT” key
