Technical Data
Laminator / 4-in-1 Set A 230 Plus / A330 Plus
26
The lamination result is not as good
as expected - the laminated pouch
is not completely transparent or is
wavy, or the laminated material is
damaged.
Only use laminating pouches that meet
the requirements in the Technical Data.
Do not exceed the maximum thickness of
the laminated material and pouch.
Laminate the same pouch again to im
prove the lamination result.
Make sure you do not hot-laminate heat-
sensitive material.
If you use thicker laminating pouches
(100 μm or 125 μm), allow the laminator
to warm up longer.
Technical Data
Laminator A230 Plus
Laminating system:
Hot-roller
Working width
230 mm
Laminating temperature
COLD: max. 25 °C
HOT:
97 - 105 °C
Laminating width (max.)
230 mm
Warm-up phase
Approx. 120 seconds
Pouch thickness
75 - 125 micron
Laminating speed:
400 mm/min.
Automatic switch-off
in case of overheating
Yes
Indicator lamps
2, Ready and Power
Cool down phase
Approx. 15 min.
Rollers
2
Power supply
220 - 240 V, 50 Hz, 1.3 A
Power consumption
300 W
Dimensions
367 x 145 x 70 mm
Weight
Approx. 855 g
Suitable materials
(hot lamination)
Non-heat-sensitive material up to a total thick
ness of 0.5 mm
Suitable materials
(cold lamination)
Heat-sensitive material up to a total thickness
of 0.5 mm
Summary of Contents for A 230 Plus
Page 108: ......
