Symptoms
Possible Cause
Solution
Ref. in Manual
5. Platen
* The connector (CN208 or
CN209) is not connected.
Connect the
connector.
3.6, 5.2
The platen does not feed paper
forward, or does not feed it
forward evenly.
* The connector (CN205) is not
connected.
Connect the
connector.
3.3, 3.6, 5.4
* The LF motor has failed.
Replace.
3.3, 5.4
* IC (CPU, ROM, gate array,
etc.), TRA202 (control PCB:
999-32300) or TR216-219
(control PCB:999-35810) has
failed.has failed.
Replace. 3.6,
5.2
* The control PCB has failed. Replace.
3.6, 5.2
* The LF motor spring has
failed.
Reassemble
or replace.
5.4
* A foreign object, such as a
label or a paper clip is caught
between the platen and the
paper pan.
Remove the
object.
Adjust the line
locator.
4.4.7, 5.3
6. Printing
Printed characters do not
appear at all on the paper.
* The connector (CN206,
CN208, or CN209) is not
connected.
Connect the
connector.
3.2, 3.6, 5.2
* The hammer solenoid has
failed.
Replace. 3.3,
5.6
* The ribbon has been used up
or has broken.
Replace.
Ref. to operating
instructions
* IC (CPU, ROM, gate array,
etc.), TR201/TR203 (control
PCB:999-32300),
TR204/TR207 (control
PCB:999-35810) has failed.
Replace. 3.6,
5.2
* The control PCB has failed.
Replace. 3.6,
5.2
Some characters are not
printed.
* The printwheel is not set
properly, or is not installed.
(The front plate is positioned
incorrectly.)
Reassemble,
replace, or
press the
CODE+W key.
Ref. to operating
instructions
* Spokes on the printwheel are
broken.
Replace.
Ref. to operating
instructions
* The membrane sheet has
failed or is not installed.
Reassemble. 3.2, 5.2
* The contact spring has failed. Replace.
5.2
8-2
Summary of Contents for Carrera De Luxe MD
