Cash Register CM 940-F / 941-F / 942-F
Olympia 2011
Page 97
Specifications subject to change without notice!
6.26
Programming kitchen receipts
Orders can be transferred directly to the kitchen and printed on an external kitchen printer as kitchen receipts.
There are
8 different printout versions of kitchen receipts
(see Chapter 6.5.1.8)
which combine the printing of order
receipts and single receipts
and which are transferred to a kitchen printer
. With regard to these 8 versions, the default
setting is for the respective version number (KD#)
to be printed at the top of the kitchen receipt.
A kitchen printer can be programmed instead of the version number, e.g. to specify the section within the kitchen in which
the food was prepared (cold food, hot food, salads, etc.).
Up to 8 kitchen printer receipts can be programmed, each with a maximum of 18 characters.
Example:
"Salads" should be programmed instead of KD#6.
Input Display
KITCHENPRINTER 1-
1
1. Set the key to PRG.
2. Select
programme number 43
(see Chapter 6.1.2).
3. Press
the
┣
CASH
┫
key to confirm
the selection.
#
[
]name
[ ]
COM-PORT No.
KITCHENPRINTER 6-
1
4. Use
the
┣
CASH
┫
key to select the
required memory location (1 to
8).
5x
#
[
]name
[ ]
COM-PORT No.
5. Use
the
┣↑┫
and
┣↓┫
keys to
move to the
[ ] Name
input area.
[
]name
6. Press
the
┣
CASH
┫
key to confirm
the selection.
#
7. Enter the required kitchen receipt
message (max. 18 characters)
(see Chapter 6.2).
Procedure,
see Chapter 6.2
Salads
8. Press
the
┣
CASH
┫
key to confirm
the input.
#
[Salads
]name
Note:
The
[ ] COM-PORT No.
area is reserved and
cannot be programmed
with this cash register
model.
9. Conclude programming by press-
ing the
┣
SUB-TOTAL
┫
key.
"
