Cash Register CM 940-F / 941-F / 942-F
Olympia 2011
Page 116
Specifications subject to change without notice!
7.2 Registering
departments
Note:
Do not enter a decimal point when entering a price; the cash register automatically enters the decimal point
according to the setting defined (refer to Chapter 6.31).
Note:
If you have programmed two fixed prices for departments (see Chapter 6.4) which you also want to register,
you must program the two keys
┣
PRICE1
┫
and
┣
PRICE 2
┫
on the keyboard (see Chapter 4.3.2 and 6.28)!
Subsequently, press the
┣
PRICE 1
┫
or
┣
PRICE 2
┫
key before registering the item in order to define which fixed
price you want to register.
Important
: This assignment remains for the duration of a registration process until you press the
┣
PRICE 1
┫
and
┣
PRICE 2
┫
keys to indicate a new assignment!
7.2.1
Registering a DP once using fixed price 1
Important information
●
A fixed price must have been programmed for price 1 (refer to Chapter 6.4).
●
If two fixed prices have been programmed (refer to Chapter 6.4), the cash register always operates with fixed price 1.
●
If you press the
┣
PRICE 2
┫
key, the cash register operates using fixed price 2 for the duration of the registration until
you press the
┣
PRICE 1
┫
key to reactivate fixed price 1.
●
After concluding a registration process, price 1 is automatically reactivated!
7.2.1.1
Items were previously registered using price 1
Example:
Department 1 should be registered with price 1.
Input
1. Set the key to REG
2. Press the relevant department key.
$
7.2.1.2
Items were previously registered using price 2
Example:
Department 1 should be registered with price 1.
Input
1. Set the key to REG
2. Press
the
┣
PRICE 1
┫
key.
3. Press the relevant department key.
┣
PRICE 1
┫
$
"
