Cash Register CM 940-F / 941-F / 942-F
Olympia 2011
Page 141
Specifications subject to change without notice!
9 Training
Mode
Activate Training mode to practise using the cash register.
It is important to activate Training mode when practising to ensure the actual sales figures are not falsified. When Training
mode is active, all the operating functions can be accessed; the difference to Registration mode being that the entries and
transactions are not recorded in the cash register reports.
Important:
Please observe the information provided at the beginning of Chapter 11 regarding your obligations in respect
of providing proof and preserving records for the revenue authorities!
Note:
To switch Training mode on and off, the
┣
TRAINING
┫
key is required. This must first be set up on the
keyboard (refer to Chapter 6.28).
9.1
Activating Training mode
1. Set the key to REG
Display
2. Press
the
┣
TRAINING
┫
key.
Password:
3. Enter the current pass
code (default setting:
000000).
******
4. Press
the
┣
CASH
┫
key.
17-06-2011
T
0.00
Note:
If Training mode is switched on, a "T" appears in the display.
Note:
Within the scope of programming the clerk system (refer to Chapter 6.7), the clerk rights can be used to
define which clerk may use Training mode. In order for the clerk rights to take effect, the clerk system must
be activated (see Chapter 6.7.3).
Note:
If the clerk system is deactivated by means of system option 3, a pass code must be entered to switch
Training mode on.
Note:
You can reprogramme the 6-digit training pass code (see Chapter 6.13).
