Cash Register CM 980-SF / 980-F / 960-SF / 962-SF
Olympia 2012
Page 67
All Rights Reserved!
6.9.2
Programming clerks
Example:
The name "Eva" must be programmed for clerk no. 2. The pass code must be set to 222222. Clerk no. 2
should receive a commission of 3% of the net sales and be assigned all clerk rights except that for printing
Z-reports.
1.
Set the key to PRG.
2.
Select
programming number 06
(see Chapter 6.1.2).
3.
Press the
┣CASH┫
key to confirm
the input.
The first clerk appears in the display.
Input
Display
=CLERK
1- 1=
[01
]
PASS CODE
0
COMM.RATE%
0
COMM.FACTOR
00
STATUS1
00
STATUS2
00
STATUS3
Save...!!
…
4.
Use the
┣CASH┫
key to switch to
the required clerk memory loca-
tion.
CLERK
2- 1=
[02
]
5.
Use the
┣↑┫
and
┣↓┫
keys to
move to the input area for the
clerk name.
6.
Press the
┣CASH┫
key to confirm
the input.
7.
Delete the existing text.
8.
Enter the clerk name (text input,
refer to Chapter 6.2).
2x
then
E
6x
then
Ev
4x
then
Eva
9.
Conclude text input by pressing
the
┣CASH┫
key.
[Eva
]
10. The cash register automatically
switches to the
PASS CODE
in-
put area.
PASS CODE
11. Enter the current pass code (de-
fault setting: 000000).
Note:
Always enter the pass
code as a 6-digit number!
12. Press the
┣CASH┫
key to confirm
the input.
******
PASS CODE
- Continued on next page -
