Cash Register CM 980-SF / 980-F / 960-SF / 962-SF
Olympia 2012
Page 91
All Rights Reserved!
6.21
Programming foreign currencies
A maximum of 2 foreign currencies can be programmed.
Note:
If you want to operate with the second foreign currency, you must programme the
┣FC 2┫
key on the keyboard
(see Chapter 6.33). The
┣FC 1┫
key, already setup on the flat keyboard of the CM 980-F at the factory, only
applies to foreign currency 1.
Clarify the following before starting with the actual programming operation:
Which foreign currency should be programmed?
In which memory location should this foreign currency be programmed?
What text is associated with the foreign currency (e.g. the currency abbreviation in accordance with ISO 4217)?
What is the exchange rate (foreign currency to local currency)?
Example:
US Dollar should be programmed as the foreign currency in memory location 2. The exchange rate at the
time of programming was 1 EUR = 1.35 USD (native currency = 1 EUR, foreign currency = 1.35 USD).
1.
Set the key to PRG.
2.
Select
programming number 16
(see Chapter 6.1.2).
3.
Press the
┣CASH┫
key to confirm
the input.
The first foreign currency memory
location appears in the display.
Input
Display
FC
0 1 1
[FC-01
]
Native:
0,01
Foreign:
0,01
4.
Use the
┣CASH┫
key to switch to
the foreign currency memory loca-
tion.
FC
0 2 1
[FC-02
]
Native:
0,01
Foreign:
0,01
5.
Use the
┣↑┫
and
┣↓┫
keys to switch
to the [
FC-0x
] text
input area.
[FC-02
]
6.
Press the
┣CASH┫
key to confirm
the input.
FC-02
7.
Delete the existing text.
8.
Enter the new foreign currency
text (see Chapter 6.2).
2x
then
U
4x
then
US
1x
then
USD
9.
Conclude text input by pressing
the
┣CASH┫
key.
[USD
]
10. Use the
┣↑┫
and
┣↓┫
keys to move
to the
Native: [ ]
input area.
Native: 0.01
11. Enter the native currency amount.
Native: 1.35
12. Press the
┣CASH┫
key to confirm
the input.
Save...!!
Please Continue...
- Continued on next page -
