Olympia NC 580
- 16 -
1.4. Start-up procedure
1. Connect the power cable to the NC 580.
2. Connect the main power cable to a wall outlet and switch the NC 580 on.
3. The machine automatically starts in mixed value mode.
4. Place the banknotes flush stacked on two sides in the middle of the feeder and adjust the two banknote
limiters close to the stack of notes for the best counting results. If the banknotes are not stacked flush or
centred, counting errors are not excluded.
Please note:
To avoid miscounting and damage to the unit the following banknotes should be separated out before
counting:
1. pasted
banknotes
2. washed
banknotes
3.
very dirty banknotes
4. damaged
banknotes