Olympia NC 580
- 17 -
Settings and functions
2.1. Set functions
ADD function
Press “ADD” button to activate the addition mode. The ADD
display turns on.
If more than 9,999 banknotes are to be counted, then with
10,000 banknotes the displayed number is reset to 0 and
counting is resumed.
Batch count
You can also use one of the programmed batch stops.
Press the BAT button once to display the batch value 100
bottom right on the display. Repeatedly press BAT button
to access batch stops of 50, 20 and 10.
Press “+1” button to adjust the preset values individually
and set each count stop between 1 and 200.
The machine stops as soon as the set number of
banknotes is reached. When the banknotes are removed
from the stacker, the counting continues.
Press “C” button to reset the batch value to zero and batch
counting stops.
Counting speed
The NC 580 has 3 different counting speeds that can be
changed by pressing the SPEED button.
For heavily used banknotes we advise you NOT to use the
highest speed for counting, because those notes are ‘hard
to catch’.
By pressing the SPEED button you can change between
following counting speeds:
x
S
(800 notes per minute)
x
M
(1,200 notes per minute) and
x
H
(1.500 notes per minute)
Addition and batch function enabled
Addition function disabled
Batch function enabled
Addition function enabled
Batch function disabled
Counting speed:
M (1.200 / notes per minute)
