OL3020 User Manual
39
Entering Your Message
1. Use
UP
and
DOWN
on the blinking field to scroll through the upper and lower
case letters of the alphabet, numbers 0-9 and punctuation marks.
2. Use
the
RIGHT
key to move onto the next character. The
LEFT
and
RIGHT
keys may also be used to find the desired location for reselecting, editing, or
deletion.
3. Hold
SELEC
T down to delete flashing character. If it is at the beginning of the
line, it deletes all the characters.
4. When your message is complete, press
SELECT
to confirm.
Note: During programming, after 20 seconds of inactivity, or an incoming call
will return the device to Standby mode. The setting is saved.
10 Erase All Memories
The following procedure erases the Caller ID list and user programmed messages.
Date, Time, Time Mode, Date Format, and DST are retained.
1. Press
SELECT
; press
UP
to find
ERASE MEMORY
in the Menu.
2. Press
SELECT
again.
ERASE ALL?
appears.
3. Press
SELECT
key to confirm.
4. The
word
ERASED
appears, and then the InfoGlobe returns to Standby Mode.
11 Caller ID
(Note: This section applies if you subscribe to Caller ID service)
The InfoGlobe will detect Caller ID with the inbound ringing. Twenty seconds
after Caller ID information is received, the display will return to Standby.
•
Caller ID information will be received and stored in the call log which has a
maximum number of 54 memory locations; each location holds up to 16 digits and
18 characters.
•
The last Caller ID received will be the first to be shown in the list.
•
When the Caller ID list is full the oldest Caller ID is automatically deleted and the
most recent Caller ID is added.
