6.
SET VIP CALLS (assigning VIP designations to CID records)
The user can create VIP call records. When a VIP call is received, 4 beeps will be heard between rings, and the
VIP
icon will be displayed.
a. Press
‘
▼
/#’ or ‘
▲
/*’ to select the call which you want to designate ‘VIP’.
b. Press and hold ‘
CALLS
’ for 2 seconds; the VIP icon turns on.
c. To remove the VIP designation, press and hold ‘
CALLS
’ for 2 seconds.
*
Press ‘CHAN.’ to return to standby (idle) mode.
*
No activity for 20 seconds will return your handset to standby mode.
7.
‘Smart’ Dialing from Caller ID
You can dial a phone number stored in Caller ID memory.
a.
In idle mode, press ‘#’ or ‘*’ to select the CID record you want to dial.
b.
If the display phone number is in the correct format, press ‘
TALK
’ to dial.
1.
If the display shows
10 digits
in the second line, such as ‘123-456-7890’.
1) Press ‘
CALLS
’; it will change to 11 digits: ‘1123-4567890’.
2) Press ‘
CALLS
’ again; it will change to 7 digits: ‘456-7890’.
3) Press ‘
CALLS
’ again; it will change to 8 digits: ‘1-456-7890’.
4) Press ‘
CALLS
’ again; it will change to 10 digits: ‘123-456-7890’.
5) Press ‘
CALLS
’ again to repeat the cycle above.
2.
If the display shows
7 digits
in the second line such as ‘456-7890’, & the area code is set as ‘123’:
1) Press ‘
CALLS
’; it will change to 8 digits: ‘1-456-7890’.
2) Press ‘
CALLS
’ again; it will change to 10 digits: ‘123-456-7890’.
3) Press ‘
CALLS
’ again; it will change to 11digits: ‘1123-4567890’.
4) Press ‘
CALLS
’ again; it will change to 7digits: ‘456-7890’.
5) Press ‘
CALLS
’ again to repeat the cycle above.
c.
With the correct number displayed, press ‘
TALK
’. The display will show ‘TALK’.
TALK
d.
After a 2-second delay, the unit will enter TALK mode automatically. The dialed digits appear from right to
left on the display.
4 5 6 7 8 9 0
*
While in CID review mode, you can
press ‘CHAN’ to return to standby (idle) mode.
*
No activity for 20 seconds will return the display to standby mode.
OL6815 User Manual
18
