Advanced features
6
If you want security reception to begin now (and at this same time every day),
skip to step 8.
Otherwise, go on to step 7.
7
Use the numeric keypad to enter the time (use a 24-hour format) when secu-
rity reception should begin every day. “Type over” the numbers displayed.
Here, we’ve entered 17:35:
To change a digit, press
to move to the left, or
to move right. Then enter
the correct digit.
8
Press
ENTER
to save the setting.
Helpful tip: After setting for activating the security reception, you can assign the
security reception to the Soft key (see page 3.17) to turn it on and off.
Turning on the security reception by pressing a Soft key is not
effected the time setting you entered at step 7. It begins the security
reception immediately.
To turn the security reception on by pressing a soft key:
1
Program a Soft key which is assigned security reception. (See page 3.17.)
2
Press a Soft key that is assigned security reception.
3
Enter the protection passcode and then press
ENTER
.
The
LCD
briefly shows following and the
LED
of the Soft key will light and the
security reception begins immediately.
Note: To turn the security reception off, see “Printing from security
reception/Turning off security reception,” next column.
Printing from security reception / Turning off security reception
When security reception is on, an incoming fax goes directly into your machine’s
memory and the
MEMORY RECEIVE
light comes on. But the incoming fax message is
not printed.
To retrieve the faxes received during this security reception (and to return your
machine to normal reception until the next time):
1
Press Program key,
D
, 3, 0, 4,
ENTER
If you using the Soft key, press the Soft key instead of this operation.
In which way, the
LCD
shows:
2
Use the numeric keypad to enter the passcode. Here we’ve entered 6296:
3
Press
ENTER
.
• If you’ve entered the correct passcode, your fax machine will print all docu-
ments in its memory and then erase them. Then it will turn security
reception off until the next time you’ve scheduled security reception or the
Soft key which programmed security reception is pressed.
If you using the Soft key, the
LED
light of the Soft key will be off.
• If you’ve entered an incorrect passcode, your fax machine will refuse to
print, and security reception remains on.
Security Rx Doc.
Enter Passcode :6296
Security Rx Doc.
Enter Passcode :****
** Sec. Rx Active **
Enter Passcode :****
Security Rx
Enter Time: 17:35
3.51
Summary of Contents for OM 9812
